Product Name: Halogen-free high-temperature hot melt adhesive | electronic components fixed with hot melt adhesive material: This product is made of pure imported antistatic polyolefin resin, there is a strong electrical insulation, capacitance, resistance play a strong protective effect. But up to now, the high concentration reached 40% of antistatic masterbatch relatively rare, are generally 30% or less, a big reason is that non-ionic antistatic agent melting point between 50-70 ℃, after making use of hot melt adhesive on the circuit board components, but for components corrosion damage is relatively large, please caution. Antistatic agent by absorbing ambient moisture, the surface resistivity of the material to reduce static object, it is a large dependence on the ambient humidity. Obviously, the higher the ambient humidity, the water-absorbing molecules, anti-static agents, anti-static properties, the more remarkable. Extend the life of components. Very good resistance to high-temperature characteristics are not deformed at 110 ℃ high temperature environment 1500 hours, not unglued; This product has passed the EU RoHS, REACH, halogen, PFOS and many other international environmental test items, and by SGS or CTI certification bodies ; absolutely environmentally friendly products. Applications: Test comparison: high temperature hot melt adhesive market test items Connord high temperature hot melt adhesive heat sag (100 ℃) 1500 hours without deformation 350 hours already sagging cold Liberal landing test -3 ℃ / 120cm free fall does not rattle 3 degrees above zero has been bursting strength heat-resistant adhesive hoists 50 ℃ 1kg.2 ℃ ↑ / min without unglued 50 ℃ 1kg.2 ℃ ↑ / min unglued recommended product quality and stability of the failure to spend money to solve practical problems, causing you distressed hot melt three major problems: 1, high temperature below standard: up to a certain temperature to lose stick unglued, causing customer complaints; 2, mainly the adhesive strength: jerry, low use of raw materials, resulting in a viscous not strong unglued; 3, high and low temperature hot melt adhesive poor: (1) high temperature: the adhesive components finished product shipments, often at temperatures up to 70 degrees of shipping containers in the car, due to high temperature reach, hot melt extrusion viscosity reduction can not withstand shaking transit lead components and plastic separation, (2) Anti-cold: not withstand the low temperatures below zero environments truck bumps shake and rattle glue is easy unglued ; eventually lead to customer returns rework, loss of money is small, once the corporate reputation damage is a major event. Summary: a good reputation is the trump card that can enable enterprises to achieve a multiplier effect on competition in the market, determine the future of the enterprise. Therefore, enterprises should attach importance to establish the credibility of the business philosophy, in the credibility of the creation, protection, and work hard to improve. When immediate credibility and corporate conflicts occur, we should credit the first place, at the expense of temporary economic benefits in exchange for the long-term interests of the business.